iP90 series Printer Driver Ver. 4.8.3 (Mac OS X 10.2/10.3/10.4/10.5)



    I have read and understood the disclaimer below
    and wish to download the designated software


    • Mac OS X v10.4
    • Mac OS X v10.5
    • Mac OS X v10.2
    • Mac OS X v10.3


    This product is a printer driver for Canon IJ printers.

    Update History

    -Newly supports Mac OS X v10.5

    System requirements

    Mac OS X 10.2.8/10.3.9/10.4.11/10.5.8


    Mac OS X v10.2
    1. Even during printing, the Print Center status bar message "Opening printer connection" does not change.
    2. Error messages are displayed in English.
    3. In Preview, a Tiff file cannot be printed, and the error message "Printer Error. An error occurred while printing." is displayed.
    4. During printing, if an error dialog is displayed, and if the button in the dialog is clicked, Print Center is immediately closed, or the same error message will appear at resumption of printing.
    5. If Advanced Options is selected in the Print dialog first, and then the Presets setting is changed, the LED keeps blinking in green, and printing does not start.
    6. In the Spanish version, in Utility, the Quiet Mode time setting cannot be switched to "am" from "pm". (It stays with "pm".)
    7. When printing multiple copies in auto duplex printing, collated printing is not possible.
    8. When attempting to print, the printer does not operate in some instances.

    Mac OS X v10.3 to v10.4
    9. Installation of the printer driver may require a little time to complete, and it takes 3 to 4 (possibly as much as 8 to 9) minutes from when the Continue Installation button is clicked until the Restart button is displayed.
    10. In wireless connection, after print head alignment, the operation panel does not become active again, and the utility cannot be used in some instances.
    11. Multiple numbers of the same printer name are registered to the Printer Setup Utility in some instances.
    12. Even when an error is released, the error message remains in some instances.
    13. When attempting to print, the printer does not operate in some instances.
    14. In the following environment, even after clicking "About ink" in the Ink Level Information menu of the Canon IJ Printer Utility or "Initial Check Items" in the confirmation dialog for nozzle check pattern printing, nothing is displayed:
    Security Update 2005-005 or Security Update 2005-006 is installed in Mac OS X Ver. 10.3.9
    15. In Mac OS X Ver. 10.4 or later, the number of copies cannot be entered in the Print dialog.
    16. When the Print dialog is displayed from IllustratorCS2 or InDesignCS2 in Mac with Intel-made processor, the margins are incorrect and so the message "The entered value cannot be applied to margin" is displayed. Therefore, as "Margin" or "Duplex Printing & Margin" option is not displayed, auto duplex printing cannot be performed.
    17. When the following procedures are performed, iPhoto6 crashes.
    1. Display Page Setup while the print dialog is open.
    2. Click OK or Cancel to close Page Setup.
    3. Click Advanced in the lower middle of the print dialog.
    18. When the following procedures are performed, the following items are not displayed in the print dialog menu of iPhoto6:
    - Quality & Media
    - Borderless & Printing
    - Duplex Printing & Margin
    1. Display Page Setup while the print dialog is open.
    2. Click OK or Cancel to close Page Setup.
    3. Click Advanced in the lower middle of the print dialog.

    Mac OS X v10.5
    19. When the monitor resolution is 1024 x 768 or less, as the "Print" and "Cancel" buttons are displayed behind DOCK, those buttons cannot be clicked.

    Setup instruction

    Procedures for the download and installation
    1. Click the link. The download will start automatically.
    2. Files will be saved on the computer desktop.
    3. Double-click the file to mount the Disk Image.
    4. Double-click the mounted Disk Image.
    5. Double-click the .pkg file in the folder. Installation starts automatically.

    File information

    1. File name : ip90sosx483ej7.dmg
    2. File version : 4.8.3
    3. File size : 7132KB


    All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.  

    Canon Singapore Pte. Ltd. and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.   

    Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).

    You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat or create derivative works from the Content, in whole or in part.  

    You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.

    By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.

    Was this helpful?

    YES. It solved my issue

    It covered my problem, but the solution still didn't work for me

    The information on the page is hard to understand

    It has nothing to do with my issue