2.8MP HDR - CMOS Image Sensors - Canon South & Southeast Asia

2.8MP HDR

High Dynamic Range CMOS Image Sensor

LI7060SA is a CMOS type solid-state imaging sensor having a size equivalent to 1/2.3 inch, and 3.2 μm square pixels, 7.75mm Diagonal 2.8MP, 94pin LGA. Enable to realize a high dynamic range of 120 decibels (dB) via double exposure and an effective pixel count of 2.8 million pixels (1936 x 1456).

Pixel Design

RGB: LI7060SAC

Approx. 2.8 MP

1,936 x 1,456 pixels

3.2µm x 3.2µm pixels

Wide-area image capture enabled by a 4:3 aspect ratio

Supports image capture in a 4:3 aspect ratio with a resolution of approximately 2.81 million effective pixels and greater vertical viewing space than a 16:9 Full HD aspect ratio (1920x1080).

MIPI CSI-2 interface

A standardized interface ensures board applications

High Dynamic Range(HDR)

Light is detected simultaneously in both bright and dark fields
Normal 75dB, HDR drive mode 120dB

Application

Surveillance Camera

2.8MP CMOS Image Sensor Technical Specifications

Model	LI7060SAC
Filter Type	RGB
Optical Size	Approx. 1/2.32 inch
Effective Pixel	1,936 x 1,456 (2.8MP)
Pixel Size	3.2μm × 3.2μm
Shutter Type	RS
Dynamic Range	75dB 120dB (HDR)
Saturation	21,000
Sensitivity (e/lx/sec)	22,000 (Green)
Frame Rate	60fps 30fps (HDR)
Output	576 Mbps in MIPI-CSI2 output 60 fps @12 bit (RAW12)
Supply Voltage	3.3V, 1.8V, 1.2V
Operation Temperature	TBD
PKG Type	Ceramic LGA
PKG Size	15.07mm x 13.37mm x 2.74mm

Note: The contents of this specification are subject to change without notice.