2.8MP HDR - CMOS Image Sensors - Canon South & Southeast Asia

    2.8MP HDR

    High Dynamic Range CMOS Image Sensor

    LI7060SA is a CMOS type solid-state imaging sensor having a size equivalent to 1/2.3 inch, and 3.2 μm square pixels, 7.75mm Diagonal 2.8MP, 94pin LGA. Enable to realize a high dynamic range of 120 decibels (dB) via double exposure and an effective pixel count of 2.8 million pixels (1936 x 1456).

    Pixel Design

    RGB: LI7060SAC

    Approx. 2.8 MP

    1,936 x 1,456 pixels

    3.2µm x 3.2µm pixels


    Wide-area image capture enabled by a 4:3 aspect ratio

    Supports image capture in a 4:3 aspect ratio with a resolution of approximately 2.81 million effective pixels and greater vertical viewing space than a 16:9 Full HD aspect ratio (1920x1080).

    MIPI CSI-2 interface

    A standardized interface ensures board applications

    High Dynamic Range(HDR)

    Light is detected simultaneously in both bright and dark fields
    Normal 75dB, HDR drive mode 120dB


    • Surveillance Camera

    2.8MP CMOS Image Sensor Technical Specifications

    Model LI7060SAC
    Filter Type RGB
    Optical Size Approx. 1/2.32 inch
    Effective Pixel 1,936 x 1,456 (2.8MP)
    Pixel Size 3.2μm × 3.2μm
    Shutter Type RS
    Dynamic Range 75dB
    120dB (HDR)
    Saturation 21,000
    Sensitivity (e/lx/sec) 22,000 (Green)
    Frame Rate 60fps
    30fps (HDR)
    Output 576 Mbps in MIPI-CSI2
    output 60 fps @12 bit (RAW12)
    Supply Voltage 3.3V, 1.8V, 1.2V
    Operation Temperature TBD 
    PKG Type Ceramic LGA
    PKG Size 15.07mm x 13.37mm x 2.74mm

    Note: The contents of this specification are subject to change without notice.

    Related Products