EOS 7D Mark II Firmware Update, Version 1.1.2 [Windows]

    26-May-2017
    0400323102

    Download

    I have read and understood the disclaimer below
    and wish to download the designated software

    OS

    • Windows 10 (x64)
    • Windows 10
    • Windows 8.1 (x64)
    • Windows 8.1
    • Windows 8 (x64)
    • Windows 8
    • Windows 7 (x64)
    • Windows 7

    Detail

    Firmware Version 1.1.2 incorporates the following fix:

    Corrects the phenomenon in which remote shooting with the Camera Connect App is not possible after connecting the EOS 7D Mark II to a smartphone via the Wi-Fi Adapter W-E1.

    • This phenomenon only occurs when the firmware was updated from Version 1.0.5 or earlier to Version 1.1.1.
    • There is no need to update the firmware if the firmware was updated from Version 1.1.0 to Version 1.1.1, or if the EOS 7D Mark II was equipped with Firmware Version 1.1.1 at the time of purchase.

    When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.

    Q&A:
    Preparations for a firmware update:

    After the downloaded compressed file (.zip) is extracted, a firmware folder is created.

    *Extracting the downloaded file:
    Right-click the zip file, and then select Extract All to extract the file.

    The extracted folder contains the firmware (File name: 7D200112.FIR, File size: 31,483,232 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).

    Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.

    Q: Please tell me about the changes made in Firmware Version 1.1.2?
    A: The following fixes have been included:

    Corrects the phenomenon in which remote shooting with the Camera Connect App is not possible after connecting the EOS 7D Mark II to a smartphone via the Wi-Fi Adapter W-E1.

    • This phenomenon only occurs when the firmware was updated from Version 1.0.5 or earlier to Version 1.1.1.
    • There is no need to update the firmware if the firmware was updated from Version 1.1.0 to Version 1.1.1, or if the EOS 7D Mark II was equipped with Firmware Version 1.1.1 at the time of purchase.

    (The following is the history of past firmware updates)

    Q: Are the improvements from previous firmware versions included in this firmware?
    A: Yes, the following improvements from the previous version are included:

    (Previous) Version 1.1.1 improvements:

    1. Enhances reliability of communications when transferring images using Wireless File Transmitter WFT-E7 (A/B/C/D/E).
    2. Corrects the phenomenon of Err70 which occurs with certain combinations of settings.
    3. Corrects the phenomenon in which in very rare cases the shutter can no longer be released.
    4. Enhances reliability of operations for specific custom function settings.

    (Previous) Version 1.1.0 improvements:

    1. Support for Wi-Fi Adapter W-E1 has been added.
    2. An option has been added which allows select STM lenses*1 to be retracted or remain extended when the power to the camera has been turned off.
    *1 EF 40mm f/2.8 STM, EF 50mm f/1.8 STM, or EF-S 24mm f/2.8 STM lenses

    (Previous) Version 1.0.5 improvements:

    1. Improves AF accuracy when used in combination with the EF 16-35mm f/2.8L USM lens or EF-S 17-55mm f/2.8 IS USM lens.
    2. Fixes a phenomenon in which, in very rare cases, the "Peripheral illumination correction" is applied inconsistently.
    3. Fixes a phenomenon, in which, while performing an EF lens firmware update, the progress bar displayed on the LCD monitor may freeze at 100% even though the update has been completed.
    4. Fixes a processing error in relation to the leap second for the "Geotag information appended to image" and "Log data" GPS functions.
    5. Fixes a phenomenon, where at the time of shooting in very rare cases "Err 70" occurs, or the shutter does not release.

    Please note:
    After updating the firmware, you should reconfirm any AF Microadjustments you may have set for your
    EF 16-35mm f/2.8 USM or EF-S 17-55mm f/2.8 IS USM lens.

    (Previous) Version 1.0.4 improvements:

    1. Fixes a phenomenon whereby the AF does not operate properly at a focal length of about 100 mm when used in combination with an EF 70-200 mm F2.8L IS II USM lens.
    2. Fixes a phenomenon in the AI servo AF whereby, in rare cases, a reduction in the flicker effect cannot be obtained when Flicker Reduction is set to "On".
    3. Fixes a phenomenon whereby the Picture Style settings are not reflected properly in custom shooting mode (C1/C2/C3).
    4. Fixes a phenomenon whereby, in very rare cases, the shooting date/time in the shooting information of the first picture is not recorded correctly.
    5. Fixes a phenomenon whereby, in very rare cases, when brightness or contrast is automatically corrected by the Auto Lighting Optimizer function, there is noise in JPEG images.

    File information

    1. File name : eos7d2-v112-win.zip
    2. File version : 1.1.2
    3. File type : zip
    4. File size : 32441KB

    Disclaimer

    All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.

    Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.

    Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).

    You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.

    You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.

    By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.

    Was this helpful?

    YES. It solved my issue

    It covered my problem, but the solution still didn't work for me

    The information on the page is hard to understand

    It has nothing to do with my issue