Connect the Power Cord and Turn On the Machine
Solution
1. Connect the power cord into the rear socket on the back side of the machine and the wall outlet, and press the [I] side of the main power switch (A) to ON.
WARNING
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, please move away from this product and consult your doctor.
NOTE
- If the LCD display is turned off, the machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and continue the setup.
- If <CLOSE COVER/TONER COVER> is displayed, make sure that the toner cover and scanning platform are closed properly. For details, see Install Toner Cartridge.
- If <SET PAPER AGAIN/SET TONER AGAIN> is displayed, check the installation of the toner cartridge and the placement of the paper. For details, see Install Toner Cartridge and Set up the Paper Cassette and Load Paper.
- Any data stored in the memory, including received fax documents, will be deleted if you turn off the main power switch of the machine.
- During electrical storms, disconnect the power cord from the power outlet. (Please note that received documents stored in the machine’s memory may be lost when you unplug the machine.)
- Whenever you unplug the machine, wait at least five seconds before you plug it in again.
- Do not plug the machine into an uninterruptible power supply (UPS).