Solution
Hold the shutter button all the way down to shoot continuously.
IMPORTANT
- The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] (
).
- Cannot be used with the self-timer or [Blink Detection].
- During continuous shooting, focus and exposure are locked at the position/level determined when you pressed the shutter button halfway.
- Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
- As more shots are taken, shooting may slow down.
- Shooting may slow down if the flash fires.
For details on the shooting modes in which the [Continuous] (
) settings cannot be made, please see the
table at the end of this section.
1. Press the <Power> button.
2. Press the <FUNC./SET> (
) button, choose [Drive mode]in the menu, and then choose (
).
4. The following screen appears on the LCD monitor.
If the [Continuous] (
) icon is displayed on the upper-left part of the screen, the setting is completed.
As long as you hold the <shutter button> down, the camera will shoot successive images.
For details on continuous shooting speeds, please see the table below.
| Models | Shooting Modes | Maximum Speed (Approx. Images/sec.) |
|---|
PowerShot A3500 IS
PowerShot A2600
PowerShot A1400
PowerShot ELPH 130 IS / IXUS 140
PowerShot ELPH 120 IS / IXUS 135
PowerShot ELPH 115 IS / IXUS 132 | [P] Mode | 0.8 |
[Low Light] ( ) | 2.9 |
| PowerShot ELPH 330 HS / IXUS 255 HS | [P] Mode | 2.4 |
[High-speed Burst] ( ) | 6.2 |
