Printing without a Power Outlet (SELPHY CP910)

    20-Dec-2013
    8201962500

    Solution

    To print where no power outlet is available, use Battery Pack NB-CP2L and Charger Adapter CG-CP200 (both sold separately). On a full charge, up to about 36 sheets* of postcard-size paper can be printed.
    * According to Canon testing. May vary depending on printing conditions.

    Attaching the Battery Pack
    1. Remove the battery terminal cover.



    2. Attach the battery pack to the charger adapter.
    Slide the terminal-end in the direction of the arrow and insert the other end until it clicks into place.



    Charging the Battery Pack
    Connect the power cord to the charger adapter with the battery pack inserted.
    • Battery charging begins, and the orange lamp is lit.
    • When charging is finished in about four hours, the green lamp will be lit.
    • Charging continues if you turn on SELPHY with the charger adapter connected but will stop while printing.



    Battery-Powered Printing
    Connect the charger adapter to SELPHY.


    NOTE
    • For battery precautions, refer to the battery user manual.
    • Keep the charger adapter on a desk or other stable surface while it is connected to SELPHY, and be careful not to unplug the cable by mistake.

    Was this helpful?

    YES. It solved my issue

    It covered my problem, but the solution still didn't work for me

    The information on the page is hard to understand

    It has nothing to do with my issue