Attaching the Camera Strap (EOS M5)

    17-Oct-2016
    8203250100

    Solution

      The procedure for attaching the bundled camera strap to your camera is explained below.

      Attach the left side of the strap to the camera’s left strap mount eyelet, and the right side to the camera’s right strap mount eyelet.



      1. Prepare the strap.
      • Pull the cap in the direction of while holding the ring.
      • Rotate the ring in the direction of .



      2. Attach the ring.
      • Pass the end of the ring through the holder as shown.



      3.Turn the ring around.
      • Rotate the ring in the direction of .
      • When rotating the ring, be careful not to pass the strap through the gap in the ring.



      4.Secure the ring.
      • To secure the ring, slide the cap in the direction of until it clicks into place.
      • On the other side of the camera, secure the ring the same way.


      IMPORTANT
      • Always follow these steps to attach the strap correctly. If the strap is not attached correctly, the camera may fall.

      Was this helpful?

      YES. It solved my issue

      It covered my problem, but the solution still didn't work for me

      The information on the page is hard to understand

      It has nothing to do with my issue