PIXMA TS707 / TS707a

Print

Print Head / Ink

Type

Permanent

Number of Nozzles

Total 4,096 nozzles

Ink Cartridges

PG-780 (Pigment Black)
CLI-781 (Cyan, Magenta, Yellow, Black)
[Optional: PG-780XL (Pigment Black),
CLI-781XL (Cyan, Magenta, Yellow, Black)]

Maximum Printing Resolution

4800 (horizontal)*1 x 1200 (vertical) dpi

Print Speed*2 (Approx.)

Based on ISO/IEC 24734
Click here for Summary Report
Click here for Document Print and Copy Speed Measurement Conditions

Document (ESAT/Simplex)

15 / 10 ipm (mono/colour)

Document (FPOT Ready / Simplex)

 8 / 10 sec (mono/colour)

Photo (4 x 6") (PP-201/Borderless)

21 sec

Printable Width

Up to 203.2 mm (8"),
Borderless: Up to 216 mm (8.5")

Printable Area

Borderless Printing*3

Top/Bottom/Right/Left margin: each 0 mm

Bordered Printing

127 x 127 mm:
Top/Bottom/Left/Right margin: 6 mm

89 x 89 mm:
Top/Bottom/Left/Right margin: 5 mm

#10 Envelope/DL Envelope:
Top margin: 8 mm, Bottom margin: 12.7 mm
Left/Right margin: 5.6 mm

LTR/LGL:
Top margin: 3 mm, Bottom margin: 5 mm,
Left margin: 6.4 mm, Right margin: 6.3 mm

Others:
Top margin: 3 mm, Bottom margin: 5 mm,
Left/Right margin: 3.4 mm

Bordered Auto 2-Sided Printing

Top/Bottom margin: 5 mm,
Left/Right margin: 3.4 mm
(LTR: Left: 6.4 mm, Right: 6.3 mm)

Support Media

Rear Tray

Plain Paper
Photo Paper Pro Platinum (PT-101)
Photo Paper Pro Luster (LU-101)
High Resolution Paper (HR-101N)
Photo Paper Plus Glossy II (PP-201, PP-208)
Photo Paper Plus Semi-Gloss (SG-201)
Matte Photo Paper (MP-101)
Envelope
Photo Sticker (PS-208, PS-808)

Cassette

Plain Paper

Multi-purpose Tray

Printable Nail Sticker (NL-101), disc printing

Paper Size

Rear Tray

A4, A5, B5, LTR, LGL, Envelopes (DL, COM10), Square (5 x 5", 4 x 4", 89 x 89 mm), Card Size (91 x 55 mm), 4 x 6", 5 x 7", 7 x 10", 8 x 10"

[Custom size]
width 55 - 215.9 mm, length 89 - 676 mm
*F4 is possible via custom size settings.

Cassette

A4, A5, B5, LTR

[Custom size]
width 148 - 215.9 mm, length 210 - 297 mm
*F4 is possible via custom size settings.

Paper Size (Borderless)
Paper types NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transfers

A4, LTR, 4 x 6", 5 x 7", 7 x 10", 8 x 10", Card Size (91 x 55 mm),
Square (5 x 5", 4 x 4", 89 x 89 mm)

Paper Handling (Maximum Number)

Rear Tray (Plain Paper)

A4/LTR = 100, HR-101N = 80

Rear Tray (Photo)

4 x 6" = 20, 5 x 7" = 10

Cassette (Plain Paper)

A4, LTR = 250

Multi-purpose Tray

1 sheet (Manual bypass)

Support Media for Auto 2-sided printing

Type

Plain Paper

Size

A4, A5, B5, LTR

Paper Weight

Rear Tray:

Plain Paper: 64 - 105 g/m2,
Canon specialty paper: Max. 300 g/m2
(Photo Paper Pro Platinum PT-101)

Cassette:

Plain Paper: 64 - 105 g/m2

Ink End Sensor

Dot count

Print Head Alignment

Auto/Manual

Network

Printing Solutions

System Requirements

Please visit https://asia.canon/support to check OS compatibility and to download the latest driver updates

Windows 10 / 8.1 / 7 SP1
(Operation can only be guaranteed on a PC with a pre-installed Windows 7 or later)

Mac OS X 10.10.5 ~ 10.11,
macOS 10.12 ~ 10.14

Chrome OS

General Specifications

Operation Panel

Display

Full dot

Language

32 Languages Selectable:
Japanese / English / German / French / Italian / Spanish / Dutch / Portuguese / Norwegian / Swedish / Danish / Finnish / Russian / Czech / Hungarian / Polish / Slovene / Turkish / Greek / Simplified Chinese / Traditional Chinese / Korean / Indonesian / Slovakian / Estonian / Latvian / Lithuanian / Ukrainian / Romanian / Bulgarian / Croatian / Vietnamese

Interface

USB 2.0

PictBridge (Wireless)

Available

Operating Environment*4

Temperature

5 - 35°C

Humidity

10 - 90% RH (No dew condensation)

Recommended Environment*5

Temperature

15 - 30°C

Humidity

10 - 80% RH (No dew condensation)

Storage Environment

Temperature

0 - 40°C

Humidity

5 - 95% RH (No dew condensation)

Quiet Mode

Available

Acoustic Noise (PC Print)

Plain Paper*6 (A4, Mono)

50.5 dB(A)

Power

AC 100-240 V, 50/60 Hz

Power Consumption (Approx.)

OFF

0.3 W

Standby (scanning lamp is off)
USB connection to PC

 0.9 W

Standby (all ports connected, scanning lamp is off)
[EU only - for ErP Lot 26 regulation]

1.6 W

Time to enter Standby mode
[EU only - for ErP Lot 26 regulation]

10 min 57 sec

Printing*7 (USB connection to PC)

23 W

Duty Cycle

15,000 sheets

Dimensions (WxDxH) (Approx.)

Factory Configuration

372 x 365 x 158 mm

Output/ADF Trays Extended:

372 x 628 x 322 mm

Weight (Approx.)

5.4 kg

Page Yield*8

Plain Paper 
Click here for more information

A4 Colour Documents*9:
CLI-781 (C, M, Y) : 250
CLI-781 BK: 1478*11
PG-780 PGBK: 200


Optional:
CLI-781XL (C, M, Y): 800
CLI-781XL BK: 8162*11
PG-780XL PGBK: 600

Photo Paper (PP-201)
Click here for more information

4 x 6" Photos*10:

Standard:
CLI-781 (C, M, Y) : 98
CLI-781 BK: 240*11
PG-780 PGBK: 1518*11

Optional:
CLI-781XL (C, M, Y): 328
CLI-781XL BK: 892*11
PG-780XL PGBK: 7060*11

  1. Ink droplets can be placed with a pitch of 1/4800 inch at minimum.
  2. Document print speeds are the averages of ESAT (Word, Excel, PDF) in Office Category Test for the default simplex mode, ISO/IEC 24734. Photo print speed is based on the default setting using ISO/JIS-SCID N2 on Photo Paper Plus Glossy II and does not take into account data processing time on host computer. Print speed may vary depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used etc.
  3. Paper Type NOT supported for borderless printing are as follows: Envelope, High Resolution Paper, T-Shirt Transfer, Photo Stickers.
  4. The performance of the printer may be reduced under certain temperature and humidity conditions.
  5. For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.
  6. Acoustic Noise is measured based on ISO 7779 standard with default setting.
  7. Print: When copying ISO/JIS-SCID N2 (printed by inkjet printer) on A4 size plain paper using default settings.
  8. Page yields may vary depending on content coverage, print settings, temperature, humidity, and frequency of printing.
  9. Declared yield value is in accordance with ISO/IEC 24711 (for A4 size), using ISO/IEC 24712 colour chart. Values obtained by continuous printing.
  10. Declared yield value is in accordance with ISO/IEC 29102, using ISO/IEC 29103 chart. Values obtained by continuous printing.
  11. Estimated supplemental yield. 

Disclaimer
  • To maintain optimal printer performance, Canon printer automatically perform cleaning based on its condition. During this cleaning process, a small amount of ink is consumed, which may include all colours of ink.
    [Cleaning Function]
    The cleaning function helps remove air bubbles or clogs from the print head nozzles, preventing degradation in print quality or nozzle blockages.
  • Replacement parts for printers will be available for five years after production is discontinued. Depending on your model, we may recommend replacing it with a new unit or one that offers similar performance as part of our maintenance service. In such cases, you may find that supplies or accessories for your model are no longer available, or that compatible operating systems may change.
  • To achieve optimal print quality, use the ink within six months of opening.
  • Depending on your device, whether it is a computer or a smartphone and its operating system, the estimated ink level information displayed on your screen may differ from what appears on the printer's operation panel. Additionally, some parts of the estimated ink level message shown on the printer may not be visible or may appear at different times. Canon recommends using the information displayed on the printer's operation panel as your primary reference, noting that this information serves only as a guideline.
  • Depending on the type of paper and print settings, colour ink may still be used even when you print a monochrome document. If any colour of ink runs out, you will need to replace the ink cartridge.
  • You must install ink cartridges of all colours, regardless of whether you are printing in monochrome or colour. If any ink cartridges is not installed, an error will occur, and printing will not be possible.
  • When you use the Canon printer for the first time after installing the bundled ink cartridges, the printer consumes a small amount of ink to fill the nozzles of the print head. As a result, the number of sheets you can be printed with the initial set of ink cartridges is fewer than the subsequent cartridges.
  • The printing costs mentioned in the brochures or on the website are based on consumption data from the second and subsequent ink cartridges, not the first one.
  • For warranty details, please contact a Canon authorised sales representative in your country or region. 
  • Ink cartridges sold are generally meant for use with printers sold in the same region. The ink cartridges may bear unique labels or configurations and may not be compatible for use with printers sold in another region. To ensure optimal performance of your printer, please check with your local Canon office or authorised Canon reseller before relocating your printer from the location of purchase.
  • Please be aware that if a problem arises from using non-genuine ink cartridges (including those refilled with non-genuine ink through methods such as making a hole in the cartridge), a fee will be charged for repairs, even during the warranty period. Keep this in mind when using non-genuine ink.
  • Using non-genuine inks may affect the printer's performance and print quality. In rare cases, where there are no safety concerns, non-genuine inks can cause the print head to overheat and emit smoke due to the absence of certain ingredient found in genuine ink.
    [Note: This does not apply to usage of all non-genuine inks.]