Solution
The charging procedure and charging time for the battery supplied with your camera are explained below.
1. Remove the protective cover.
2. As shown in the illustration, attach the battery securely.
To detach the battery, follow the procedure in reverse.
[LC-E17]
As shown by the arrow, flip out the battery charger's prongs and insert the prongs into a power outlet.
[LC-E17E]
Connect the power cord to the charger and insert the plug into the power outlet.
- Recharging starts automatically and the charge lamp () turns orange.
- When the battery is fully recharged, the full-charge lamp () will turn green.
NOTE
- It takes approx. 2 hours to fully recharge a completely exhausted battery at room temperature (23°C / 73°F). The time required to recharge the battery will vary greatly depending on the ambient temperature and the battery’s remaining capacity.
- For safety reasons, recharging in low temperatures (5°C - 10°C / 41°F - 50°F) will take longer (up to approx. 4 hours).
IMPORTANT
- After disconnecting the charger’s power plug, do not touch the prongs for at least 5 sec.
- Do not charge any battery other than a Battery Pack LP-E17.
- Battery Pack LP-E17 is dedicated to Canon products only. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.
CAUTION
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.